MPPT charge controller
Victron SmartSolar MPPT 100/30
Set the LiFePO4 profile; verify fusing and wiring.
ElectricalHealthy
Solar charge controller
Victron Energy · SmartSolar MPPT 100/30
Near batteries
First charge showed max PV 90 W and a 9 h bulk with no absorption/float yet — likely SOC/conditions, no fault proven. Combined charge current must stay under LiTime's ~100 A max.
Verify onboard: Confirm LiFePO4 profile: bulk/absorption 14.2–14.6 V, float 13.5–13.8 V.
Last serviced
First-charge review Jul 2025
Open issues
0
Open tasks
0
Parts on record
1
Interval: Monitor output; inspect connections and strain relief
Service history
Every logged job that touched this component.
Interpreted the solar system's first charge readings
Renogy 200 W panel, Victron MPPT 100/30, SmartShunt, LiTime battery
Follow-up: Continue monitoring; verify full-charge synchronization.
July 31, 2025
Tasks
Planned and completed work for this component.
Nothing planned
No open or past tasks reference this component.
Parts & consumables
Part numbers on record — check confidence before ordering.